Selecting Audible Signal Operation; Warning Chimes And Warning Indicator - Subaru Crosstrek 2020 Manual

Hide thumbs Also See for Crosstrek 2020:
Table of Contents

Advertisement

! By operating the driver's door
1. Sit in the driver's seat, and close the
door.
2. Push " " of the power door locking
switch.
3. Within 5 seconds after step 2 is
performed, open the driver's door.
4. Within 5 seconds after step 3 is
performed, push " " of the power door
locking switch twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver's
door twice.
6. Within 10 seconds after step 5 is
performed, push " " of the power door
locking switch twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver's
Keys and doors/Keyless access with push-button start system
door once.
8. Within 5 seconds after step 7 is
performed, close the door.
A chirp sound will be heard, and the
functions will be disabled.
NOTE
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
! Enabling functions
When the procedure to disable the func-
tions is performed again, a chirp sound will
be heard, and the functions are enabled.
NOTE
. The keyless access function will be
enabled only if you perform the proce-
dure in the same manner you disabled
the function (for example, when dis-
abling by operating the driver's door,
the function will not be enabled even if
you operate the access key fob).
. Press the push-button ignition
switch if you do not know the proce-
dure in which the keyless access func-
tion was disabled.
– When disabling by operating the
driver's door: a chirp will not be
heard
– When disabling by operating the
access key fob: a chirp will be heard
& Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
For models with the combination meter
display (color LCD), the setting can be
changed by operating the combination
meter display (color LCD). For details,
refer to "Vehicle Setting" F3-40.
& Warning chimes and warning
indicator
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to "Warning chimes and
warning indicator of the keyless access
with push-button start system" F3-24.
– CONTINUED –
2-13

Advertisement

Table of Contents
loading

Table of Contents