Warning Chimes And Warning Indicator - Subaru WRX-STI Owner's Manual

2-14
Keys and doors/Keyless access with push–button start system
NOTE
After touching the door lock sensor to
lock all of the doors, if you touch the
door lock sensor once more to attempt
the lock operation without first unlock-
ing the doors, nothing will happen,
even if the door lock sensor is touched.
In this case, perform the unlocking
operation once first. You can then
touch the door lock sensor to lock the
doors.
! Door unlock selection function
The door unlock selection function makes
it possible to unlock the driver s door
without unlocking any other doors.
The operational/non-operational setting
for this function can be changed by a
SUBARU dealer.
Operational: Only the driver s door will be
unlocked.
Non-operational: All doors will be un-
locked.
For the factory setting (default setting),
refer to Function settings F26.
For further details, we recommend that
you consult a SUBARU dealer.
! Power saving function
The keyless access function will be
disabled in the following cases to protect
the access key battery and the vehicle
battery.
Case 1: When the keyless access func-
tion and the remote keyless entry system
have not been used for 2 weeks or longer
while all doors are locked
Case 2: When the access key has been
left in the operating range for 10 minutes
or longer while all doors are locked
! Recovery from power saving
mode
When one of the following is operated, the
keyless access function will be recovered.
Case 1:
. Unlock the doors by operating any
procedure other than gripping the front
passenger s door handle
. Lock or unlock the doors
. Open a door and then close it
Case 2:
. Unlock the doors by gripping the door
handle
. Lock the doors by touching the door
lock sensor
. Lock or unlock the doors by using the
remote keyless entry system
. Lock or unlock the doors by using the
power door locking switch
. Open either of the front doors
! Automatic locking (except models
with double locking system)
If any of the doors was not opened within
30 seconds after unlocking, they will be
automatically locked again.
The function s operational/non-operational
setting and the time until automatic locking
takes place can be changed by a
SUBARU dealer. For more details, we
recommend that you contact a SUBARU
dealer.
The setting and the time can also be
changed by operating the multi function
display. For details, refer to Security
Relocking F3-86.
& Warning chimes and warning
indicator
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to Warning chimes and
warning indicator of the keyless access
with push-button start system F3-28.