Subaru Outback 2016 Manual page 271

! Control screen and panel
No. Function
&
Select to display the audio source
1
selection screen.
Select to display the play mode
&
currently selected. Refer to "Select
2
play mode" F5-38.
Select to display as a list (for the
&
models with AVRCP Ver. 1.4 or high-
3
er).
Select to play back or pause a track.
&
The track pauses when pressed dur-
4
ing playback and plays back when
pressed during pause.
&
Select to open Bluetooth Settings.
5
&
Select to display the sound setting
6
screen. Refer to "Unit settings" F5-18.
No. Function
&
Turn to adjust volume.
7
Press to turn the audio system on/off.
Turn to select a track.
&
Press to select an audio source. Refer
8
to "Selecting an audio source" F5-17.
&
Press to select a track.
9
Press and hold to fast forward/rewind.
NOTE
. Depending on the Bluetooth device
that is connected to the system, the
music may start playing when selecting
while it is paused. Conversely, the
music may pause when selecting
while it is playing.
Audio/Media operation
. In the following conditions, the sys-
tem may not function:
– The Bluetooth device is turned
off.
– The Bluetooth device is not con-
nected.
– The Bluetooth device has a low
battery.
. It may take time to connect the
phone when Bluetooth audio is being
played.
. For operating the portable player,
see the instruction manual that comes
with it.
. If the Bluetooth device is discon-
nected due to poor reception from the
Bluetooth network when the ignition
switch is in the "ACC" or "ON" posi-
tion, the system will automatically
reconnect to the portable player.
. If the Bluetooth device is discon-
nected on purpose, such as it was
turned off, this does not happen.
Reconnect the portable player manu-
ally.
– CONTINUED –
5-37