Subaru Outback 2016 Manual page 65

! Models without ALR
1. Remove the head restraint of the rear
seating position where the child restraint
system is to be installed.
2. Store the removed head restraint in
the trunk (Sedan) or cargo area (Outback).
3. Place the child restraint system on the
seat.
Seat, seatbelt and SRS airbags/Child restraint systems
4. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
5. Insert the tongue plate into the buckle
until you hear a click.
1) Lock-off lever
6. Release the child restraint system
lock-off lever and pass the shoulder belt
through the lock-off lever.
7. Take up the slack in the lap belt. At this
time, to secure the child restraint system
more firmly, apply your weight to push it
down into the seat cushion as you tighten
the seatbelt.
– CONTINUED –
1-35