7
Assembly
41. Install front declutch cover plate using Loctite 242 threadlocker
on the bolt threads. Torque to specifi cation. Figure 7.65.
Figure 7.65
42. Place the range shift forks into the housing with the fl at sides
facing each other. Then insert the shift shaft in through the
housing and through the shift forks. Figure 7.66.
Flat
Side
Figure 7.66
MM-2034 / Issued 02-21
Page 43
43. Place a new o-ring on the shoulder of the shift shaft. Then coat
Front Declutch
Cover Plate
Figure 7.67
44. Install the shift cylinder adapter to the housing. Then install
4018206a
Flat
Side
Figure 7.68
4018293a
Copyright Meritor, Inc., 2021
the o-ring with Lubriplate or similar. Figure 7.67.
the nylon stop ring, spring, and piston onto the shaft using
Loctite 272 threadlocker on the retaining nut threads. Torque to
specifi cation. Figure 7.68.
Adapter
Spring
O-ring
4018294a
Stop Ring
Piston
4018205a
Printed in USA