Meritor MTC Series Maintenance Manual page 22

5 Disassembly
Rear Output Shaft
1. Heat the bearing lock nut slightly to soften the locking compound
and remove the lock nut using "Bearing Lock Nut Socket", tool
number 866-0687-004 page 53. Figure 5.41.
Figure 5.41
2. Remove front declutch gear along with the speedometer tone ring.
Figure 5.42.
Figure 5.42
MM-2034 / Issued 02-21
Page 19
4018303a
4018304a
3. Remove the front support bearing. Figure 5.43.
Figure 5.43
4. Invert the shaft to remove direct drive gear and rear support
bearing. Figure 5.44.
Figure 5.44
Copyright Meritor, Inc., 2021
PRESS
4018232a
PRESS
4018233a
Printed in USA