Meritor MTC Series Maintenance Manual page 16

5 Disassembly
18. Remove and discard the front output carrier seal. Figure 5.18.
Figure 5.18
19. Remove the indicator switch and copper washer. Remove the front
drive engagement indicator switch pin. Figure 5.19.
Copper
Washer
Pin
Figure 5.19
MM-2034 / Issued 02-21
Page 13
Front Output
Carrier Seal
Indicator
Switch
4018211a
20. Remove the shift shaft from housing followed by the declutch shift
fork and collar. Figure 5.20.
4018210a
Figure 5.20
21. Remove the yoke nut and yoke from the rear input shaft. Remove
the rear output shaft spacer from the rear shift fork bolts. Be
careful not to drop the safety wire into the housing output shaft.
Figure 5.21.
Figure 5.21
Copyright Meritor, Inc., 2021
Shift
Shaft
Declutch
Collar
4018212a
4018213a
Printed in USA