7
Assembly
17. Install the rear output front bearing cup into the housing.
Figure 7.41.
Figure 7.41
18. Install all declutch housing gasket shims that were removed
during disassembly. Install the declutch housing onto the main
housing using Loctite 272 threadlocker. Torque the bolts to
specifi cation in a crisscross pattern. Figure 7.42.
Figure 7.42
MM-2034 / Issued 02-21
Page 37
Front Bearing
Cup
4018273a
4018274a
Copyright Meritor, Inc., 2021
19. Install the rear output shaft into the housing from the rear.
Figure 7.43.
Figure 7.43
20. Install the intermediate shaft assembly into the housing. Figure
7.44.
Intermediate
Shaft
Figure 7.44
Rear Output
Shaft
4018275
4018276a
Printed in USA