Meritor MTC Series Maintenance Manual page 14

5 Disassembly
10. Lightly fi le the shift shaft to remove the indentations left by the set
screws. This will prevent damage to the case and make the forks
and shaft easier to remove. Figure 5.10.
Shift Fork
Set Screw
Marks
Figure 5.10
11. Remove the front declutch shift cylinder cap bolts. Then remove
the cylinder cap and cylinder sleeve by sliding them off the piston.
Figure 5.11.
Bolts (4)
Cylinder
Cap
Figure 5.11
MM-2034 / Issued 02-21
Page 11
4018203a
Cylinder
Sleeve
4018204a
Copyright Meritor, Inc., 2021
12. Remove the piston, spring, and nylon stop ring. If necessary, the
shift cylinder adapter may also be removed from the case. Figure
5.12.
Adapter
Spring
Figure 5.12
13. Inspect the adapter o-rings and the shift shaft o-rings and felt
wiper for damage. Replace if necessary. Figure 5.13.
O-rings
O-ring
Felt Wiper
O-rings
Figure 5.13
Stop Ring
Piston
4018205a
O-rings
Felt Wiper
O-rings
4018302a
Printed in USA