Table of Contents
Advertisement
30. Slide the input shaft to the front of the case using a piece of wood
in between the gear and the case to support the direct drive gear.
Figure 5.30.
Figure 5.30
31. Using a large brass drift and a hammer, drive the input shaft
forward, forcing the direct drive gear and rear bearing off the
shaft. Be careful not to let the input shaft fall to the fl oor. Figure
5.31.
Figure 5.31
Printed in USA
4018222a
Drive Out
Rear Bearing &
Direct Drive Gear
4018223a
32. Remove the bearing, direct drive gear, and clutch gear while
sliding the input shaft out the front of the case. Figure 5.32.
Figure 5.32
33. Slide the intermediate shaft toward the rear of the housing as far
as possible to facilitate the removal of the input shaft direct drive
gear. Figure 5.33.
Figure 5.33
Copyright Meritor, Inc., 2021
5
Disassembly
4018224a
4018225a
MM-2034 / Issued 02-21
Page 16
Advertisement
Table of Contents
