Table of Contents
Advertisement
14. Remove the front declutch cover plate. Discard the gasket and
clean both surfaces. Figure 5.14.
NOTE: It is not necessary to remove the declutch housing to
disassemble the case.
Figure 5.14
15. Remove and discard the lock wire from the front declutch shift
shaft bolts. Then remove the declutch shift fork bolts using a hex
socket. Figure 5.15.
Figure 5.15
Printed in USA
Front Declutch
Cover Plate
4018206a
Lock
Wire
4018207a
Copyright Meritor, Inc., 2021
16. Remove the yoke nut, washer, and yoke from the front output
carrier. Figure 5.16.
Figure 5.16
17. Remove the front output carrier bolts and then remove the front
output carrier with seal from the housing. Remove the front output
shaft assembly. Discard the gasket and clean both surfaces.
Figure 5.17.
Figure 5.17
5
Disassembly
4018208a
Front
Output
Carrier
4018209a
MM-2034 / Issued 02-21
Page 12
Advertisement
Table of Contents
