Capabilities And Preferences - Preferences Tab - Nortel BCM50 Installation Manual

56

Capabilities and Preferences - Preferences tab

The Preferences headings allow you to program the same settings that users can perform at their
telephones and the settings for configuring a telephone as a hotline. The set-based options are only
available to digital phones and IP telephones.
Figure 15 Capabilities and Preferences - Preferences tab screen
The following table describes the headings found on the User Preferences screen:.
Table 15 Capabilities and Preferences - Preferences screen fields
Setting
Language
Dialing options
Call log options
Available log space
Contrast
Ring type
DN records parameters
Values Description
Languages displayed Choose the language for the telephone display prompts.
are based on
telephone capabilities
and system software
Standard dial Determine how the telephone handles dialed information.
Pre-dial Standard: Pick up the receiver and dial.
Automatic dial Pre-dial: Dial the numbers, then pick up the receiver to allow the
telephone to dial the number.
Automatic dial: Use for devices like fax machines where you want
the number to dial out without external cues.
Note: Not all devices show all three options.
Log all calls, Select how you want the telephone to handle logging calls.
No autologging,
Log all calls: All calls are noted in the call log.
No one answered
No autologging: No calls are automatically logged.
Unanswered by me
No one answered: Unanswered calls are not logged.
Unanswered by me: Unanswered calls are not logged.
Refer to:
<read-only> This setting indicates the total amount of space available for call
logging on the system.
1, 2, 3,4, 5.....9 Adjust the contrast of the display.
1, 2, 3, 4 Select a distinctive ring pattern type for the telephone.
Default is 1.
"Call log" on page 542.