Siemens SIMATIC ET 200SP Manual page 51

Technical specifications
Article number
Potential separation
Potential separation channels
•
Isolation
Isolation tested with
Ambient conditions
Ambient temperature during operation
•
•
•
•
Altitude during operation relating to sea level
•
Decentralized operation
to SIMATIC S7-300
to SIMATIC S7-400
to SIMATIC S7-1200
to SIMATIC S7-1500
to standard PROFIBUS master
to standard PROFINET controller
Dimensions
Width
Height
Depth
Weights
Weight, approx.
Note
Installation heights > 2000 m
You can find information on the restrictions when using the ET 200SP distributed I/O system
at more than 2000 m above sea level in the "Mechanical and climatic environmental
conditions" section of the ET 200SP Distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
50
between the channels and backplane bus
horizontal installation, min.
horizontal installation, max.
vertical installation, min.
vertical installation, max.
Installation altitude above sea level, max.
6ES7138-6EB00-0BA0
Yes
707 V DC (type test)
-30 °C
60 °C; Observe derating
-30 °C
50 °C; Observe derating
5 000 m; Restrictions for installation altitudes
> 2000 m, see manual
Yes; Via control and feedback interface
Yes; Via control and feedback interface
Yes
Yes
Yes; Via control and feedback interface
Yes; Via control and feedback interface
15 mm
73 mm
58 mm
45 g
Technology module TM PTO 2x24V (6ES7138‑6EB00‑0BA0)
Equipment Manual, 09/2021, A5E50983437-AA