Toshiba e-STUDIO5540C Service Manual page 1263
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO5540C:
- Management manual (282 pages) ,
- Software installation manual (238 pages) ,
- Scanning manual (134 pages)
Advertisement
Ver. 02
Page
2-12
The drum for China has been added.
Toner cartridges for Argentina have been added.
5-1
"HDD assist mode" and "SRAM clear mode" have been added to the list of modes.
The reference page sentence has been deleted from the contents for "Assist mode" in the
list of modes.
5-2
The Note text has been added to the list of modes.
5-3
The "Assist mode (3C)" section has been added.
The "HDD assist mode (4C)" section has been added.
The "SRAM clear mode (6C)" section has been added.
5-18
The "Assist Mode (3C)" section was moved from 12.3 to 5.9.
5-21–5-24
Section 5.10 HDD Assist Mode (4C) has been added.
5-30–5-31
Section 5.12 SRAM Clear Mode (6C) has been added.
5-43
The Note text has been added.
7-45
"FLTR-TONER-430_N" has been corrected to "FLTR-TONER-130-TYB".
8-16
In CA00, "Image position alignment abnormality" has been changed to "Color registration
abnormality".
8-22
The "F106_0", "F106_1", "F106_2", "F106_3", "F106_4", and "F106_5" error codes have
been aded.
8-23
In [F510], "Software boot-up error" has been changed to "Application start error".
In [F520], "Software boot-up error" has been changed to "Operating system start error".
8-125
The [C4B1] error item has been added to the troubleshooting.
8-137
In the troubleshooting for [F500], "[START]" has been changed to "[POWER]".
In [F510], "Software start error" has been changed to "Application start error".
In [F510], the contents of the measures have been changed.
In [F520], "Software start error" has been changed to "Operating system start error".
8-138
In [F520], the contents of the measures have been changed.
8-139
In the troubleshooting for [F900], "[START]" has been changed to "[POWER]".
8-162
In [CA00], "Image position alignment abnormality" has been changed to "Color registration
abnormality".
8-192–8-194
The troubleshooting for [F106_0], [F106_1], [F106_2], [F106_3], [F106_4], and [F106_5]
has been added.
8-197
"Recover the license on the SYS board" has been changed to "Transfer license from SRAM
to FROM".
"Recover the license on the SRAM board" has been changed to "Transfer license from
FROM to SRAM".
8-198
In the troubleshooting for [F121] and [F122], "[START]" has been changed to "[POWER]".
8-208
In the troubleshooting for [2B11], [2B20], [2B30], [2BC0], [2B31], [2B50], and [2B90],
"[START]" has been changed to "[POWER]".
8-209
In the troubleshooting for [2B51] and [2BA0], "[START]" has been changed to "[POWER]".
8-213
In the troubleshooting for [2C10] and [2C32], "[START]" has been changed to "[POWER]".
8-215
In the troubleshooting for [2C20], [2C21], and [2C22], "[START]" has been changed to
"[POWER]".
8-221
In the troubleshooting for [2D10], [2D32], [2DA6], and [2DA7], "[START]" has been changed
to "[POWER]".
8-223
In the troubleshooting for [2D40], "[START]" has been changed to "[POWER]".
8-226
In the troubleshooting for [2E10], "[START]" has been changed to "[POWER]".
8-228
In the troubleshooting for [2E32], "[START]" has been changed to "[POWER]".
8-250
In the troubleshooting for [6121], "[START]" has been changed to "[POWER]".
8-253
In the troubleshooting for [71AC], "[START]" has been changed to "[POWER]".
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Ver. 02 <2011.11.30>
Contents
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REVISION RECORD
Advertisement
