Toshiba e-STUDIO5540C Service Manual page 1183

Sub
05/08 Mode Element
element
08 Setting System Cleaner
Mode
08 Setting System Network Retention period
Mode
08 Setting System Network E-mail
Mode
08 Setting System Electronic
Mode filing
08 Setting System User
Mode interface
08 Setting System Electronic
Mode filing
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
9199
9200
9201
9203
9204
9207
Default Acceptable
Details
value value
Automatic interruption 500 0-9999
page number setting
for printing
File retention period 30 <0-999>
Max. size in 30 2-100
email/InternetFAX
transmission
e-Filing document 1 0-1
guarantee mode
Binarizing level 3 1-5
selection (When
judging as black in the
ACS Mode)
Default setting of user 0 0-999
box retention period
247
RAM Contents
SYS Sets the number of pages to interrupt printing
automatically.
If "1" or more is set to this code, printing is interrupted
at the set value. If "0" is set, printing is not interrupted
automatically. By the combination of this code and 08-
2509, performing image quality control is possible while
processing jobs. Even if the number of jobs exceeds
the set value of 08-2509, image quality control can be
performed around the set value of 08-2509 by
interrupting printing automatically with this code, and
the change of image density can be suppressed.
However, image problems may occur if the value
extremely smaller than the default value is set to the
equipment whose print ratio of monochrome is relatively
high.
(unit: pages)
SYS 0: No limits
1 to 999: 1 to 999 days
SYS 2 to 100 MB
SYS Sets the file retention level during edition in e-Filing
(when the document cut/save command is used) 0: Not
retained (Documents could be lost due to We session
timeout / electricity cutoff during document cut/save.) 1:
Full retained - Documents are retained until cut/save
command completion. When "1" is set, documents are
not lost even if disk full occurs during command
execution.
SYS 0: Step -2
1: Step -1
2: Step 0 (center)
3: Step 1
4: Step 2
The binarizing level of each step is set at 08-9230.
SYS Sets the data retention period when creating a user
box.0: Not deleted 1 to 999: Retention period (Unit:
Day)
Proce Servic
dure e UI
1
1 Yes
1 Yes
1
1
1