Toshiba e-STUDIO5540C Service Manual page 1199

Sub
05/08 Mode Element
element
08 Setting System User Binding margin setting
Mode interface
08 Setting System User Binding margin setting
Mode interface
08 Setting System Paper Automatic change of
Mode feeding paper source
08 Setting System Network
Mode
08 Setting System Feeding
Mode system /
Paper
transport
08 Setting System User
Mode interface
08 Setting System General
Mode
08 Setting System User Paper Feed
Mode interface
08 Setting System General Available profile
Mode display
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
9341
9342
Auto 9343
9344
9347
9352
9357
9359
9361
Default Acceptable
Details
value value
3 Top binding back 7 0-100
(Bottom binding front)
Book binding 14 0-30
Printing/BOX printing 1 <1-2>
Restriction mode of 0 0-3
network printing
O-LCF Paper 0 0-10
information
Display of paper size Refer to 0-1
setting by installation contents
operation of drawers
Enhanced bold for 0 0-1
PCL6
Printing resume after 1 0-1
jam releasing
0 BP_OP_00.icc - -
263
RAM Contents
SYS Sets the binding margin displayed as default on the
setting screen for the top/bottom/left/right binding
function when copying. (Unit: mm)
SYS Sets the binding margin displayed as default on the
setting screen for the book binding function when
copying.
SYS Sets whether the drawer is changed automatically if the
paper runs out in the selected drawer and the paper of
the same size is in other drawer.
1: ON (Changes to the drawer with the same paper
direction and size: ex. A4 to A4)
2: ON (Changes to the drawer with the same paper size.
Paper with the different direction is acceptable as long
as the size is the same: ex., A4 to A4-R, LT-R to LT. "1"
is applied when the staple/hole punch is specified.)
SYS 0: Normal 1: Private-print-only mode 2: Hold-print-only
mode 3: Private/Hold-print only mode
SYS 0: Plain paper 1: Thick paper 1 2: Thick paper 2
3: Thick paper 3 8: Recycled paper 9: Plain paper 1
10: Plain paper 2
Only 0 to 3 and 8 to 10 are acceptable.
SYS 0: Not displayed
1: Displayed
<Default value>
MJD/MJC, JPC: 0
Others: 1
SYS 0: OFF 1: ON(Enhanced bold for PCL6.)
SYS 0: Auto resume
1: Resume by users
SYS Displaying the current Output Profile and PG
CIEBasedPureGrayTRC attribute (PG
CIEBasedPureGrayTRC attribute in the same sub-code
is displayed at the same time.)
Proce Servic
dure e UI
4 Yes
1 Yes
1 Yes
1
1
1
1
1 Yes
14