Min Jitter Buffers (Min Jitter); Max Jitter Buffers (Max Jitter); Extension Length (Ext Length); Dtmf Gain - ADTRAN Express 5200 User Manual

Chapter 7. Voice Interface Configuration

Min Jitter Buffers (MIN JITTER)

The minimum number of 30 ms frames that will be buffered at the
beginning of a voice call. The range is 1-4.

Max Jitter Buffers (MAX JITTER)

The maximum number of 30 ms frames that will be used to
compensate for variance in network delay (jitter). The range is 5-10.

Extension Length (EXT LENGTH)

Number of digits used to assign extensions ( S

DTMF Gain

The output gain of regenerated DTMF tones.

DTMF Sensitivity (DTMF SENS)

The level of sensitivity at which the Express 5200 detects DTMF. If
the unit is mis-dialing, set to L

Regenerate DTMF (REGEN DTMF)

This option is used for troubleshooting purposes and should be left
at default ( Y

Max Frame Repeat (MAX REPEAT)

The maximum number of times that a frame will be replayed in lieu
of lost/late frames.

Interface Type

Two-wire or four-wire interface type selectable for the E&M voice
card only.
7-4
; otherwise, leave at N
OW
).
ES
Express 5200 User Manual
mode only).
WITCHED
.
ORMAL
61202175L1-1