Remote Fecn Notification (Rem Fecn); Llc2 Options (Llc2 Opts); Llc2 N2 Retry Counters (N2 Retry); Llc2 K Window Size (Wnd Size) - ADTRAN Express 5200 User Manual

Chapter 8. Network Port Configuration
will return to A
exceeded.
The network service provider should recommend the values entered into
the T391 , N391 , N392 , and N393 fields.

Remote FECN Notification (REM FECN)

If set to N
ing remote unit if a frame with the FECN bit enabled is received.
This is a proprietary feature with ADTRAN Express 5200s and can
only be used with an ADTRAN Express 5200 on both ends of the
virtual circuit.

LLC2 Options (LLC2 OPTS)

The VT 100 screen in Figure 8-4 appears when LLC2 (Logical Link
Control Type 2) O
P
ORT

LLC2 N2 Retry Counters (N2 RETRY)

Maximum retries for actions timed by the ACK poll, busy or reflect
timers. When N2 is exceeded, a reset condition occurs.

LLC2 k Window Size (WND SIZE)

Maximum number of outstanding unacknowledged data frames
that the LLC2 protocol will allow.

LLC2 Ack Timeout (ACK TO)

Timeout value used by the LLC2 protocol to establish the
maximum time to wait for a positive acknowledgment from a
remote device.

LLC2 Poll Timeout (POLL TO)

Maximum time to wait for a response to a command having the
poll bit set.
8-6
again once the threshold is no longer
CTIVE
R FECN , the unit notifies its correspond-
OTIFY EMOTE ON
is selected from the C
PTIONS
menu.
Express 5200 User Manual
N
ONFIGURE ETWORK
61202175L1-1