Table of Contents
Advertisement
IP Route Table
Use these menu options to build a table of addresses for routing
data packets based on their IP address. When a packet with the
specified IP address is received, it is sent out through the selected
port on the specified DLCI. See Figure 10-3.
The IP R
to provide routing paths for the entire IP network. If an IP packet is
received with a destination IP not located in the internal routing
table (static or RIP), then the gateway route is used.
61202175L1-1
1 IP ROUTE TABLE
CONFIG
IP ROUTING
2 GW IP ADDRESS
3 GW DEST PORT
4 GW DLCI
5 TX ARP
6 RX ARP
7 ARP REF
Figure 10-2. IP Routing Front Panel Menu Tree
T
can be used in conjunction with RIP protocol
OUTE
ABLE
Express 5200 User Manual
Chapter 10. IP Routing
DTE 1
1 IP ADDRESS
DTE 2
2 DEST PORT
NET
3 DEST DLCI
NONE
DTE 1
NO
DTE 2
YES
NET
10-3
Advertisement
Table of Contents
