Table of Contents
Advertisement
TD2: Transmit Data (DTE 2)
This LED is active when the Express 5200
data.
RD2: Receive Data (DTE 2)
This LED is active when the Express 5200
data.
TDN: Transmit Data (Network)
This LED is active when the Express 5200
transmitting data.
RDN: Receive Data (Network)
This LED is active when the Express 5200
receiving data.
ALM/TST: Alarm/Test
This LED is active when an alarm condition exists or when the unit
is in test mode. Alarm conditions include:
DDS Alarm Conditions
•
•
•
Frame Relay Alarm Condition
•
Front Panel Operation
To choose a menu item, press the corresponding number or alpha
character on the keypad. Press
alpha selections. Scrolling to the selection by using the up and
down arrows also activates the menu items. The flashing cursor
indicates the activated selection. Press
The following steps and Figure 3-1 illustrate how to select
Express 5200 options:
1.
2.
61202175L1-1
Open loop on network
No frame synchronization
OOS/OOF
Network frame relay signaling state down
Activate C
ONFIGURATION
pressing
. The cursor will flash on the number next to the
1
activated selection. Press
Use the arrow keys to view submenu items.
Express 5200 User Manual
Chapter 3. Operation
port is transmitting
DTE 2
port is receiving
DTE 2
NETWORK
NETWORK
to activate menu items with
SHIFT
to select the item.
ENTER
( C
) by using the arrow keys or
ONFIG
.
ENTER
port is
port is
3-3
Advertisement
Table of Contents
