Physical Layer Options (Phys Lyr Opts); Figure 6-6. Transparent Bop Menu Tree - ADTRAN Express 5200 User Manual

Chapter 6. DTE Port Configuration
and provides end-to-end connectivity between two HDLC-like
devices. See Figure 6-6 for the T
1 PROTOCOL
2 PHYSICAL LAYER OPTIONS
3 PROTOCOL OPTIONS
4 ADDRESS TABLE

Physical Layer Options (PHYS LYR OPTS)

Interface Type (INTERFACE)
Select the connector type for the
EIA-232 and V.35 .
Bit Rate
Select the operating speed of the
The bit rate selections vary depending on the speed selections made for the
Network
card is required.
6-12
4 TRANSPARENT BOP
1 INTERFACE TYPE
2 BIT RATE
3 TD CLOCK SOURCE
4 TRANSMIT IDLE CODE
5 HARDWARE FLOW CONTROL 1 OFF
1 DATA FORMAT
1 FAR END PORT NUMBER
2 OUTGOING DLCI

Figure 6-6. Transparent BOP Menu Tree

port. Also, for rates higher than 56/64 kbps, the External DCE
Express 5200 User Manual
BOP menu tree.
RANSPARENT
1 EIA 232
2 V.35
1 INTERNAL
2 EXTERNAL
1 FLAGS
2 ONES
2 ON
1 NRZ
2 NRZI
1 DTE PORT 1
2 DTE PORT 2
interface. The choices are
DTE
interface.
DTE
1 2400 bps
2 4800 bps
3 9600 bps
4 19.2 Kbps
5 38.4 Kbps
6 56 Kbps
7 64 Kbps
8 112 Kbps
9 128 Kbps
10 168 Kbps
11 192 Kbps
12 224 Kbps
13 256 Kbps
14 280 Kbps
15 320 Kbps
16 384 Kbps
17 448 Kbps
18 512 Kbps
61202175L1-1