Address Table (Addr Table) - ADTRAN Express 5200 User Manual

Address Table (ADDR TABLE)

IP Address
Enter the internet protocol (IP) address of the Express 5200 DTE
port.
Subnet Mask
Enter the subnet number of the network formed by the
Express 5200 and the Peer SLIP station.
Peer IP Address (PEER IP ADDR)
Enter the IP address of the attached SLIP device.
Transmit RIP Packets (XMIT RIP)
Enable or disable the Express 5200's transmission of routing
information protocol (RIP) messages. RIP broadcasts occur in 60
second intervals, advertising network addresses to the Peer SLIP
device. Routing tables are generated from these broadcasts.
Process Received RIP Packets (RIP PCKTS)
Enable or disable the Express 5200's reply to the request from the
Peer SLIP device to issue RIP messages.
61202175L1-1 Express 5200 User Manual
Chapter 6. DTE Port Configuration
6-27