Chapter 6. DTE Port Configuration
PPP Synchronous Protocol (PPP SYNC)
PPP S
frame relay network and also routes IP traffic from the network to
the PPP device. P
S
YNCHRONOUS
S
YNCHRONOUS
Routing
Routing tables are formed through a combination of RIP and static
route entries. If RIP is used, routing tables are generated
dynamically. With static routing, the user is able to force
relationships. Static route tables are configured through the IP
R
OUTING
Static routing requires additional configuration (see the chapter IP
Routing on page 10-1 for more information).
A port set for PPP S
traffic only.
6-20
protocol provides a PPP device access to the
YNCHRONOUS
options are not available when the PPP
ROTOCOL
protocol is enabled. See Figure 6-9 for the PPP
menu tree.
selection in the C
ONFIG
YNCHRONOUS
Express 5200 User Manual
menu.
protocol routes and supports IP
61202175L1-1