Chapter 9. Dial Backup Configuration
V.34 DBU Card
When a V.34 DBU interface card is installed, select M
to access the following configuration parameter:
Tone/Pulse
Select the dialing method for the dial backup service.
DCE Card
When an External DCE interface card is installed, select DCE
O
PTIONS
Interface Type (INTERFACE)
Select the connector type for the
EIA-232 and V.35 .
DBU Bit Rate (BIT RATE)
Set to the operating speed of the
Phone Numbers 1-5
The Express 5200 stores up to 5 numbers of 36 digits each. Edit a
phone number by reentering the entire number. This process
overwrites the previously stored number. This selection is not
available if the External DCE interface card is installed.
9-6
to access the following configuration parameters:
Express 5200 User Manual
ODEM
interface. The choices are
DCE
interface (0-1536 kbps).
DBU
O
PTIONS
61202175L1-1