Physical Layer Options (Phys Lyr Opts); Figure 6-9. Ppp Synchronous Protocol Menu Tree - ADTRAN Express 5200 User Manual

1 PROTOCOL
2 PHYSICAL LAYER OPTIONS 1 INTERFACE TYPE
3 PROTOCOL OPTIONS
4 ADDRESS TABLE

Physical Layer Options (PHYS LYR OPTS)

Interface Type (INTERFACE)
Select the connector type for the
EIA-232 and V.35 .
Bit Rate (BIT RATE)
Select the operating speed of the DTE interface.
The bit rate selections vary depending on the speed selections made for the
Network
card is required.
61202175L1-1
7 PPP SYNCHRONOUS
2 BIT RATE
3 TD CLOCK SOURCE
4 TX IDLE CODE
5 FLOW CONTROL
N/A
1 IP ADDRESS
2 SUBNET MASK
3 PEER IP ADDRESS
4 TRANSMIT RIP PACKETS
5 PROCESS RECEIVED RIP PACKETS 2 YES

Figure 6-9. PPP Synchronous Protocol Menu Tree

port. Also, for rates higher than 56/64 kbps, the External DCE
Express 5200 User Manual
Chapter 6. DTE Port Configuration
1 EIA 232
2 V.35
1 INTERNAL
2 EXTERNAL
1 FLAGS
2 ONES
1 OFF
2 ON
1 NO
interface. The choices are
DTE
1 2400 bps
2 4800 bps
3 9600 bps
4 19.2 Kbps
5 38.4 Kbps
6 56 Kbps
7 64 Kbps
8 112 Kbps
9 128 Kbps
10 168 Kbps
11 192 Kbps
12 224 Kbps
13 256 Kbps
14 280 Kbps
15 320 Kbps
16 384 Kbps
17 448 Kbps
18 512 Kbps
6-21