Process Received Arp Packets (Rx Arp); Arp Refresh Time (Arp Ref) - ADTRAN Express 5200 User Manual

Chapter 10. IP Routing

Process Received ARP Packets (RX ARP)

This parameter enables the receive portion of the network port
inverse ARP protocol. If enabled, all inverse ARP messages
received are used to associate peer IP addresses with DLCI values.

ARP Refresh Time (ARP REF)

Determine how often an inverse ARP request is sent to every DLCI
assigned to the network port.
ARP is used in conjunction with RIP to dynamically resolve IP routes
and should be enabled if RIP is enabled on the network port (see page 8-8).
10-6 Express 5200 User Manual 61202175L1-1