Table of Contents
Advertisement
Main Menu
Definitions for the branches of the M
Configuration (CONFIG)
C
ONFIGURATION
DTE, voice, network, and dial backup interfaces. IP routing and
system configuration options are also found in the C
menus. The chapter Configuration Overview on page 5-1 explains
how to access these menus. Chapters 6 through 11 provide brief
explanations for each C
based on the first level menu branches of the C
DTE Port Configuration begins on page 6-1; Voice Interface
Configuration begins on page 7-1; Network Port Configuration begins
on page 8-1; Dial Backup Configuration begins on page 9-1; IP
Routing begins on page 10-1; and System Configuration begins on
page 11-1.
When DTE P
the selections for P
A
DDRESS
for more information.
View Statistics (STATS)
This selection displays status information for DTE ports, the
network port, the protocol, the system, and the voice cards. See the
chapter Statistics on page 12-1 for more information.
Test
Testing options enable and disable voice and ping test functions.
See the chapter Testing on page 13-1 for more information.
Dial (available when DBU card is installed)
This selection allows you to access DBU functions. See the chapter
Activating DBU Functions on page 14-1 for more information.
Save Configuration (SAVE)
This parameter saves the currently selected configuration.
Configuration changes are not implemented until the S
TION
61202175L1-1
is used to set network operating parameters for the
ONFIGURATION
1 or 2 is selected, the P
ORT
L
HYSICAL
AYER
T
. See the chapter DTE Port Configuration on page 6-1
ABLE
( S
) option is selected.
AVE
Express 5200 User Manual
Chapter 3. Operation
menu follow:
AIN
ONFIGURATION
selection. The chapters are
ONFIGURATION
enabled determines
ROTOCOL
O
, P
O
PTIONS
ROTOCOL
C
AVE
menu:
, and
PTIONS
-
ONFIGURA
3-7
Advertisement
Table of Contents
