Table of Contents
Advertisement
4.8 INSTALLING PRESSURE ROLLER DISABLER TOOLS
The pressure roller disabler tool allows a pressure roller to be lifted while printing, thus providing extra space.
•
Be sure not to push the Pressure roller disabler tool too far! Otherwise the pressure roller will
break.
•
We recommend you to use two pressure roller disabler tools on both edges of the fabric.
Procedure :
Step 1 :
Take the Pressure roller disabler tool as follows in your right hand. See image below.
Step 2 :
At the back of the printer, pull the pressure roller you want to disable down with your left index
finger.
Step 3 :
Place the Pressure roller disabler tool in the space created when pulling the pressure roller
down. See image below.
Result :
The Pressure roller disabler tool is now positioned as follows :
•
When the material is more elastic (not fully elastic fabric!) than normal fabric, it can be useful to
disable all pressure rolls (those who are located on the fabric) from the fabric.
Downloaded From ManualsPrinter.com Manuals
Caution
Notes
Viper TX – Operation Instructions
64
AP-75710, Rev. 1.1, 09/01/2008
Advertisement
Table of Contents
