Adjust The Weight Supports Under The Uw/W 100 - MUTOH Viper TX Operation Instructions Manual

Step 5 :
Now fix the screws (2) of the roll unit bar so the bar doesn't move anymore.

3.5.3 Adjust the weight supports under the UW/W 100

Parts and Tools :
No. Description
1 Hexagon wrench 3 mm
3.5.3.1 Location of the weight supports on a 65" printer
There are 2 weight supports on the UW/W 100 system for a 65" machine.
3.5.3.2 Location of the weight supports on a 90" printer
There are 4 weight supports on the UW/W 100 system for a 90" machine.
Downloaded From ManualsPrinter.com Manuals
2 = Screws fixing the roll unit bar to the stand
FRONT VIEW
1 = Weight support
FRONT VIEW
1 = Weight support
Viper TX – Operation Instructions
39
Quantity
1
AP-75710, Rev. 1.1, 09/01/2008