MUTOH Viper TX Operation Instructions Manual page 52

Step 6 :
Remove all cleaning cassettes.
Step 7 :
In the "Ink Manager" menu select "Wash" and then "All".
•
•
•
•
•
Step 8 :
The display will show the following message.
Step 9 :
Remove all the cleaning cassettes, compatible with the ink.
Step 10 : Insert ink cassettes in the required configuration.
•
•
•
Step 11 : Go to the 'ink Manager' menu, select 'Inkload' and select 'All'. Confirm your selection.
•
Downloaded From ManualsPrinter.com Manuals
Ink status
No cartridge
Confirm your selection.
The display will ask you to install the cleaning cassettes ('Please insert Cleaning Cart'),
compatible with the ink.
Install the 8 NEW cleaning cassettes, compatible with the ink.
Press the [ENTER] key.
The display will show the following message.
During washing
Wait for a while
During washing
Wait for a while
Please remove
Ink status
No cartridge
The ink cassettes must be inserted in a specific slot according to the type and colour used.
Insert the cassettes with the arrow mark face-up and pointing to the rear of the printer.
Insert the cassettes as far as possible.
The display will show the following message :
Filling ink
Filling ink
Viper TX – Operation Instructions
(ALL)
10 min
0 min
cartridges
(ALL)
rest 11 min
rest 0 min
52
AP-75710, Rev. 1.1, 09/01/2008