Table of Contents
Advertisement
Quick Links
Please read this manual
before using
Thank you for purchasing a MUTOH product.
This manual explains the steps for unpacking, mount-
ing and basic installation before using the MUTOH
Full-color inkjet printer VJ-1608 Hybrid.
This manual is intended for owners, installers, and
users of this product.
Understand the contents and instructions in this man-
ual before installing this product.
Installation flow chart
The broad steps for installation are shown below.
There are instructions for each section beginning on
the next page.
1 Unpacking boxes
1.1 Unpacking the printer box
1.2 Unpacking the stand box and
media-feed table boxes
2 Confirming bundled items
2.1 Items in the printer box
2.2 Items in the accessory box
2.3 Items in the stand box
2.4 Items in the media-feed table box
VJ-1608 Hybrid INSTALLATION MANUAL
3 Assembling
3.1 Assembling the stand
3.2 Attaching the stand
3.3 Attaching the solenoid valve unit
3.4 Detaching fastening materials
3.5 Assembling the media-feed table
4 Installation
4.1 Installation environment
4.2 Installation procedure
1
5 Connecting the power cable
6 Turning the power ON/OFF
7 Installing the ink packs
8 Checking the printing condition
9 Manual composition
VJ1608HYE-I-00
Advertisement
Table of Contents
Related Manuals for MUTOH VJ-1608 Hybrid
Summary of Contents for MUTOH VJ-1608 Hybrid
-
Page 1: Installation Flow Chart
3.1 Assembling the stand This manual explains the steps for unpacking, mount- 3.2 Attaching the stand ing and basic installation before using the MUTOH Full-color inkjet printer VJ-1608 Hybrid. This manual is intended for owners, installers, and users of this product. -
Page 2: Items In The Stand Box
VJ-1608 Hybrid INSTALLATION MANUAL 2.3 Items in the stand box 1 Unpacking boxes 2 Confirming bundled items Procedures for unpacking boxes are explained. After unpacking, please confirm that the product has not damaged and no components are missing. This product is packaged separately, divided into the printer, stand, media-feed table L and media-feed table R. -
Page 3: Assembling The Stand
VJ-1608 Hybrid INSTALLATION MANUAL 3. Remove the two transfer stays and fasten the printer 3 Assembling 4. Fasten the connector bar to the left stand in the to the stand using eight butterfly screws. same way as in Step 3. -
Page 4: Installation Environment
VJ-1608 Hybrid INSTALLATION MANUAL (Cont'd) 2. Loosen the angle lever and set the Media-feed table 4 Installation base so that it is horizontal. 3. Looking at the rear of the printer, attach the short Procedures and environment for installing this product air tube to the left side of the solenoid valve unit are explained. -
Page 5: Installation Procedure
VJ-1608 Hybrid INSTALLATION MANUAL 4.1.2 Installation space 3. Set the spirit level on the right and left platens and 3. Adjust media-feed table R using the angle lever adjust so that the printer stays flat. and height-adjustment knobs so that it is horizontal. -
Page 6: Connecting The Power Cable
VJ-1608 Hybrid INSTALLATION MANUAL 5 Connecting the power cable 6 Turning the power ON/OFF 4. Clean the cleaning wiper unit. Operation Manual "6.2.4.1 Cleaning the This section explains how to turn ON/OFF the printer. cleaning wiper unit" This section explains how to connect the power cable. - Page 7 If there is no improvement in the print result even after refilling a small amount of ink, leave the printer for one hour or more, and refill a small 2 3 4 amount of ink again. If there is still no improvement, contact MUTOH Name Name Name Name local dealer.
-
Page 8: Manual Composition
VJ-1608 Hybrid INSTALLATION MANUAL 8 Checking printing conditions 6. Head cleaning starts. 9 Manual composition NOTE Check the condition of the print head after the ink re- This product includes the following three manuals. plenishment. If one time of head cleaning was not enough to re-...