Display The Ap Device, Memory, Lan, And Wifi Status Information - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
Display the AP device, memory, LAN, and
WiFi status information
You can display AP device information, memory information, Ethernet LAN information
for IPv4, WiFi LAN information, and statistics.
To display the AP device status and other information:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. To refresh the information on the page, click the Refresh button.
The following tables describe the information on the page.
Table 2. Device Information section
Setting
AP Name
Serial Number
MAC Address LAN
MAC Address Wireless
LAN - 2.4GHz
Monitor the AP and its Network
Connections
Description
The device name (system name). For more information, see Change the AP's device
name on page 46.
The fixed serial number of the AP.
The fixed MAC address of the LAN/PoE+ port.
The fixed MAC address of the 2.4 GHz radio interface.
95 User Manual