Set Up Or Change A Guest Wifi Network - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
10. Configure the following RADIUS authentication server settings:
• Group Key Update Interval: Set a period from 30 to 3600 seconds, which is the
period after which the WiFi network group key changes in the background.
(Connected users are not affected.) The default period is 3600 seconds. To disable
group key changes, set the value to 0.
• Radius Server: Set the IPv4 address of the RADIUS authentication server. The
AP must be able to reach this IP address.
• Radius Port: Set the number of the port on the AP that is used to access the
RADIUS authentication server. The default port number is 1812.
• Radius Secret: Specify the shared key (WiFi password) that is used between the
AP and the RADIUS authentication server during the authentication process.
11. Click the Apply button.
A pop-up window displays.
12. Click the OK button.
Your settings are saved. The page closes. (The original page with the Wireless Settings
section and other sections remains open.)

Set up or change a guest WiFi network

The AP supports a total of four user WiFi networks. Each user WiFi network can function
either as regular user WiFi network or a guest user WiFi network. The essential difference
between a regular WiFi network and a guest network is the pool of IP addresses that
the network assigns to its WiFi clients.
By default, and irrespective of which user WiFi network functions as a guest network,
guest WiFi devices are assigned an IP address in the range from 192.168.200.100 to
192.168.200.200. You can change these automatically assigned IP addresses by changing
the DHCP server settings for the guest networks. For more information, see Change the
DHCP server settings for guest WiFi networks on page 62.
To set up or change a guest WiFi network:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
Manage Basic WiFi Settings 40 User Manual