Schedule The Ap To Automatically Restart - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
The Dashboard page displays.
4. Select Management > System Manager > Backup Settings.
The page that displays shows the Reboot the device section and the Backup/Restore
Settings section.
5. Click the Reboot the device button.
A pop-up window displays.
6. Click the OK button.
The AP restarts. The page displays the progress.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the restart.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the AP. Wait until the AP finishes.
When the restart is finished, the login page displays.

Schedule the AP to automatically restart

You can schedule the AP to automatically restart at a time that is convenient for the
network, for example, when you do not expect any WiFi traffic to be processed.
To schedule the AP to automatically restart:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
Maintain the AP 90 User Manual