NETGEAR WAX220 User Manual page 97

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
Table 3. Memory Information section (Continued)
Setting
Cached
Buffered
Table 4. LAN Information - IPv4 section
Setting
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
DHCP Client
Table 5. Wireless LAN Information - 2.4GHz section
Setting
Wireless Mode
Channel Bandwidth
Channel
Monitor the AP and its Network
Connections
Description
The total memory in KB and the cached memory in KB and percentage.
The total memory in KB and the buffered memory in KB and percentage.
Description
The IPv4 address that is assigned to the LAN/PoE+ port of the AP. This is the IPv4
address over which you can reach the device UI. For more information, see Set a
static IPv4 address on page 29.
The subnet mask that is associated with the IPv4 address.
The IPv4 address of the gateway.
The IPv4 address of the primary DNS server.
The IPv4 address of the secondary DNS server, if any.
Shows whether the DHCP client of the AP is enabled (which it is by default). For more
information, see Reenable the DHCP client of the AP on page 30.
Description
The WiFi mode, which is fixed at 802.11 ax/n/g/b.
The WiFi channel bandwidth. For for information, see Manage the channel high
throughput mode on page 67.
The WiFi channel. For for information, see Manage the WiFi channels on page 68.
97 User Manual