Manage Universal Plug And Play - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
- Synchronize the date and time setting with the computer from which you log
in to the device UI of the AP by clicking the Synchronize with PC button.
• Automatically Get Date and Time: The AP automatically gets the date and time
from the Network Time Protocol (NTP) server that is specified in the NTP Server
field.
This is the default setting. You can specify a different NTP server from the one
that is preconfigured.
6. To configure a time zone, in the Time Zone section, select a time zone from the Time
Zone menu.
7. To enable the daylight saving time adjustment, select the Enable Daylight Saving
check box.
8. Click the Apply button.
Your settings are saved.

Manage Universal Plug and Play

Universal Plug and Play (UPnP) lets the AP be discovered by other devices in a network
that support UPnP. For enhanced security, UPnP is disabled by default. This means that
you might need to manually configure network connections for new devices, which
requires some network knowledge. For ease of management, you can enable UPnP.
To manage UPnP:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
Maintain the AP 87 User Manual