Technical Specifications - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
Table 9. Factory default settings (Continued)
Feature
Email alerts
Automatic firmware
upgrade check
LEDs

Technical specifications

The following table shows the technical specifications of the AP. For more information,
see the product data sheet, which you can download by visiting
netgear.com/support/download/.
Table 10. Technical specifications
Feature
Power adapter
Power over Ethernet
Dimensions (L x W x H)
Weight
Operating temperature
Operating humidity
Storage temperature
Storage humidity
LAN interface
WiFi interfaces
Factory Default Settings and
Technical Specifications
Default Setting
Disabled
Disabled
All enabled
Description
A power adapter is included for model WAX220PA but not for model WAX220.
Both models can operate with PoE+ power.
12V, 2.5A (30W), the plug is localized to the country of sale.
Maximum power consumption with a power adapter: 15.2W
If you do not use a power adapter, the LAN/PoE+ port requires 802.3at (PoE+)
power.
Maximum power consumption with PoE: 17W
Note: PoE might be considered a network environment 0 per IEC TR 62101, and
thus the interconnected ITE circuits might be considered safety extra low voltage
(SELV).
7.71 x 7.71 x 1.74 in. (196 x 196 x 44 mm)
1.15 lb (523 g)
32º to 104ºF (0° to 40°C)
5 to 95% maximum relative humidity, noncondensing
–40º to 158ºF (–40° to 70°C)
5 to 95% maximum relative humidity, noncondensing
One 100/1000/2500 Mbps Ethernet (RJ-45) PoE+ port with Auto Uplink (Auto MDI-X)
2.4 GHz radio
5 GHz radio
The WiFi interfaces can operate concurrently.
126 User Manual