NETGEAR WAX220 User Manual page 134

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
Unmount the AP
CAUTION: Make sure that you hold the AP so that it does not drop when you release
it from the mounting plate.
To unmount the AP:
1. Place your thumb on the locking latch, located behind the LEDs on opposite side
of the AP.
2. Press the latch towards the T-bar or wall to release the lock and keep the lock open.
3. Turn the AP counterclockwise approximately 45 degrees until the AP releases from
the mounting plate.
Mount the AP to a Wall or
Ceiling
134 User Manual