Manage The Date And Time Settings - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220

Manage the date and time settings

By default, the AP is configured to automatically get the date and time from a Network
Time Protocol (NTP) server that is preconfigured.
You can also manually set the date and time, configure a time zone, and enable daylight
saving time adjustment.
To manage the date and time settings:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Management > Management > Time Zone.
The page that displays shows the Date and Time Settings section and the Time Zone
section.
5. To configure the date and time, in the Date and Time Settings section, select one of
the following radio buttons:
• Manually Set Date and Time: Specify the date and time settings by doing one
of the following:
- Enter the setting manually by doing the following:
a. In the Date fields, specify the year, month, and date.
b. In the Time fields, specify the hour and minutes.
Use 24-hour format.
Maintain the AP 86 User Manual