Mount The Ap To A T-Bar - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220

Mount the AP to a T-bar

To mount the AP to a T-bar:
1. If the T-bar lock is not yet attached to the metal bracket, slide the T-bar lock partially
into the metal bracket.
2. Attach the metal bracket to the T-bar.
3. Push the T-bar lock over the T-bar.
4. Use the lock screw to lock the metal bracket into place.
5. Use the four short screws to attach the mounting plate to the T-bar.
Mount the AP to a Wall or 131 User Manual
Ceiling