Chapter 2 Installation And Initial Login - NETGEAR WAX220 User Manual

2
Installation and Initial Login
This chapter describes how you can install and access the AP in your network and go
through the initial login process.
Note: When you log in to the AP, you connect to its device UI.
The chapter contains the following sections:
• Set up the AP in your network
• Initial login process
• When to use aplogin.net and when to use the assigned IP address
• Find the IP address of the AP
• Log in to the AP after you complete the initial login process
• Change the language
• Join a user WiFi network on the AP
13