Table of Contents
Advertisement
3.11
Others Menu
The [Others] menu sets the equipment according to the external equipment connect-
ed.
3.11.1
Interface Setting menu
NMEA1 to 5 Baud Rate: Set the transmission rate for the NMEA 1 to NMEA 5 ports.
(4800 bps, 9600 bps, 19200 bps, 38400 bps)
EXT KP Input: Set the input logic of KP from external equipment. (Disable, Enable)
Disable: Disable external KP. Enable: Use KP from external equipment.
3.11.2
EXT Data Setting menu
Date&Time: Select the input format for date and time data. (Disable, NMEA)
Heading: Select the input format for heading data. (Disable, AD10, NMEA)
Speed&Course: Select the input format for ship's speed and course data. (Disable,
NMEA (SOG), NMEA (STW))
Speed Sensor: Select the input format for speed data. (Disable, GPS/DR, DOPPLER/
DR) If response is slow, select GPS.
Lat/Lon: Select the input format for position data. (Disable, NMEA)
Water Depth: Select the input format for water depth. (Disable, NMEA)
Water Temp: Select the input format for water temperature. (Disable, NMEA)
Water Current: Select the input format for water current. (Disable, NMEA)
Wind: Select the input format for wind data. (Disable, NMEA)
Net Depth: Select the input format for net depth data. (Disable, NMEA)
3.11.3
Others menu
Language: Select the language to use. (English, Japanese, Chinese)
Trackball Speed: Select the tracking speed for the trackball. (Slow, Normal, Fast)
Hull Unit Stroke: Select the stroke of the hull unit. (800 mm, 1100 mm)
Noise Meas. Freq: Select the frequency for which to measure noise. Two settings are
available, but keep the default setting. Meas. Freq1: 80 kHz: 95 - 145, 70 kHz: 130 -
260 Meas. Freq2: 80 kHz: -145 to -95, 70 kHz: -130 to -110
3. ADJUSTMENTS AND CHECKS
3-11
Advertisement
Table of Contents
