Table of Contents
Advertisement
1. HOW TO INSTALL THE SYSTEM
At factory default, the distance to the transmitting position is 450 mm (tank length: 900
mm). To adjust the distance to the transmitting position, unfasten the two mounting
screws (M6) to remount the TX limit switch.
TX limit
switch
1-10
Detailed view: TX limit switch
Mounting
screw (M6,
2 pcs)
25 mm:
Screw holes for mounting
TX limit
switch are prepared
at 25 mm intervals. You can
raise the
TX limit
switch
position max 100 mm .
TX limit switch
(factory default position)
Advertisement
Table of Contents
