Table of Contents
Advertisement
How to attach the fans and inertial measurement unit to the control box
extension box
Note: The inertial measurement unit is extremely shock sensitive, take care not to
drop it. Where possible, install the unit after the control box extension box has been
installed.
1. Unfasten six screws to remove the front
cover.
2. Unfasten four screws to remove the top
cover.
3. Install the fans in the control box extension box, using the four screws to secure
them in place.
Fan mounting direction
The metal fold on
each fan case
must face up.
Front cover
Fan
2. WIRING
Top cover
Control box extension box
Fan
2-21
Advertisement
Table of Contents
