Table of Contents
Advertisement
1. HOW TO INSTALL THE SYSTEM
1.10
Sub Control Unit (option)
The control unit has following three mounting methods:
• Tabletop mounting: The unit is secured from the underside.
• Tabletop mounting with KB fixture: The unit is secured from the topside.
• Flush mounting
Mounting considerations
• Select a location where the unit can easily be operated.
• Locate the unit out of direct sunlight.
• Locate the unit away from places subject to water splash and rain.
• Select a location where shock and vibration are minimal.
• Select a mounting location considering the length of the cable.
• Referring to the outline drawings at the back of this manual, allow sufficient space
for maintenance and service.
• A magnetic compass will be affected if the unit is placed too close to the magnetic
compass. Observe the compass safe distances at the front of this manual to prevent
interference to a magnetic compass.
• For flush installations, select a location where the surface is flat.
1.10.1
Desktop installation, with keyboard fixture
1. Fix the keyboard fixture to the bottom of the unit with the screws (M4x12) supplied.
2. Attach rubber feet (2 pcs.) to the bottom of the unit.
3. Fix the unit to the mounting location with self-tapping screws (local supply).
1.10.2
Desktop installation, no keyboard fixture
1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the
back of this manual.
1-24
Rubber feet
Keyboard fixture
Advertisement
Table of Contents
