Flex Speed Option; Loading Paper - Xerox Nuvera User Manual

• Speed License - 100, 120 or 144 ppm are available on systems with a BFM/BFM Plus and/or
DS3500/XPS. The 100/120 license is on systems with MFF.

Flex Speed Option

Note
The Flex Speed option is only available for 10.x version software and above. Systems that contain a
Multifunction Pro or ProPlus finisher are not eligible for the Flex Speed option.
The Flex Speed option allows you to upgrade the license of certain Xerox Nuvera systems for a period
of 30, 60 or 90 days.
Original Xerox Nuvera Speed
Xerox Nuvera 100 EA/MX Production System
Xerox Nuvera 120 EA/MX Production System
Xerox Nuvera 200 EA/MX Perfecting Production Sys-
tem
For more information on enabling Flex Speed, contact your Xerox representative.

Loading Paper

Load paper as indicated by the labels on each paper tray. If you are using the 2-Tray Feed Module, load
paper as indicated for trays 3 and 4 of the 4-Tray Feed Module.
Note
If printing on coated stock but only one side is coated, load the coated side up.
Systems with the Multifunction Finisher DO NOT support coated stock.
Note
Stocks greater than 300 gsm are not recommended for use with the Xerox Nuvera. For details on using
the correct stocks, see Supported
Note
Loading papers of varying types and weights may warrant adjustment of the Sheet Enhancement
Module. For details, see
Note
It may be possible to configure your Xerox Nuvera with two or more SFMs, effectively doubling the feed
capacity of the system. See your Xerox sales representative if you wish to configure your system in this
way.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
Paper.
Managing Paper Curl.
Xerox Nuvera EA/MX Production System
Available Flex Speed Options
Xerox Nuvera 120 EA/MX Production System or Xerox
Nuvera 144 EA/MX Production System
Xerox Nuvera 144 EA/MX Production System
Xerox Nuvera 288 EA/MX Perfecting Production System
6-5