Eu Radio Equipment Directive; Compliance With Eu Harmonics Standard En 61000-3-12:2005; Compliance With Eu Flicker Standard En 61000-3-11:2000 - Xerox Nuvera User Manual

EU Radio Equipment Directive

User Information
Hereby, Xerox declares that this radio equipment device is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following Internet address:
www.xerox.com/environment_europe
Regulatory Information for 13.56 - MHz RFID
This product contains a 13.56 -MHz Radio Frequency Identification device (RFID) that complies with
the requirements specified in FCC Part 15, Industry Canada RSS-210, and European Council Directive
2014/53/EU. Radio Frequency (RF) output power of this device will not exceed -13.5 dBm.

Compliance with EU Harmonics Standard EN 61000-3-12:2005

"Equipment Complying with EN 61000-3-12:2005"
This equipment complies with EN 61000-3-12:2005 which defines limits for Harmonic currents that may
be produced by equipment installed in the European Union and the European Economic Area.
Compliance is based on application of limits that justify installation and unconditional connection to
the public low voltage supply.

Compliance with EU Flicker Standard EN 61000-3-11:2000

"Equipment Complying with EN 61000-3-11:2000"
This equipment is suitable for use only in premises having a service current capacity equal to or greater
than 100 Amps per phase.
Electrical Safety
• Use only the power cord supplied with this equipment.
• Plug the power cord directly into a correctly grounded electrical outlet. Do not use an extension cord.
If you do not know whether or not an outlet is grounded, consult a qualified electrician.
• Do not use a ground adapter plug to connect this equipment to an electrical outlet that lacks a ground
connection terminal.
Warning
You may incur a severe electrical shock if the outlet is not grounded correctly.
• Do not place the Xerox Nuvera Printer where people may step or trip on the power cord.
• Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
• Never push objects of any kind into slots or openings on this equipment. Making a contact with a
voltage point or shorting out a part may result in fire or electrical shock.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
Safety and Certifications
3-5