Table of Contents
Advertisement
Machine Specifications
Insertion Tray
Main Tray/Stacker Capacity
Stapler Capacity
Paper Size Range
process direction
cross process direction
Stock Weight Range
uncoated:
coated:
21-12
MFF Professional
Not available
3000 sheets of 20 lb bond (75 gsm)
or equivalent
The stack limit can be set from the
UI for each BFM independently.
Stapled sets with <15 sheets are lim-
ited to 100 sets.
The Stacker is the output tray for re-
ceiving compiled stapled and un-
stapled sets as well as single sheets.
Output is normally delivered with
side-1 down and sets can be offset.
Up to 100 sheets of 20 lb bond (75
gsm) (one or two staples) or equival-
ent substrates (reduced stapled sheet
capabilities can result based on sub-
strate properties (i. e. thickness,
density, material, coating, etc.)
Includes two internal pass-through
100 sheet upside down staplers. The
stapler devices have the ability to
portrait, landscape or dual staple all
supported paper sizes. Finished sets
can be stacked internally to the lower
stacker tray.
If either of the Staplers runs out of
staples see
Replacing Staples in the
BFM
or if it jams see
Clearing Stapler
Jams.
An alternate Staple Cartridge for up
to 30 sheets of 20lb is available. (75-
80 gsm) paper capacity.
Contacting
Xerox
for information on ordering
refills.
Each Stapler Cartridge holds 5000
staples.
Contacting Xerox
for inform-
ation on ordering refills.
8.26 in to 18.5 in (210 mm to 457
mm)
8.26 in to 12 in (210 mm to 305 mm)
16 lb bond to 113 lb index (52 to 220
gsm)
No coated stock
MFF Pro Plus
200 sheets of 20 lb bond (75 gsm)
or equivalent
52-220 gsm
Delivers output to all 3 trays
Same
Same
Same
Same
Xerox
User Guide and Training Aid (UGTA)
®
Nuvera
®
Advertisement
Table of Contents
