Using The Feed Module Tab Guides; Installing The Feed Module Tab Guides - Xerox Nuvera User Manual

Type Weight
Colotech Tabs 200
Note
On Tab stock, intermittent marks from photoreceptor seams may be seen on the tabbed area of the
media.
For more information, see

Using the Feed Module Tab Guides

Use the Feed Module Tab Guides to improve the feeding of tab stock from any tray in the Feed Module.
Note
Do not use tab stock unless you install the appropriate Tab Guide in the paper tray where the tab stock
is loaded.
There are two Tab Guides:
• The A4/11" Tab Guide
• The A5/5.5" Tab Guide
Both of the Tab Guides are mounted on brackets or in a molded pocket located inside the Feed Module
Front Door.

Installing the Feed Module Tab Guides

1. Program your job as you normally would, including programming of Tabs stock as either the main
body of the job or as special pages or inserts.
2. Open the tray and remove the paper stock, if required. Move the paper guides to the open position
in order to accommodate the size of the tab stock.
3. Load the tabs into the tray. The label on the tray illustrates how to load the tab stock.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
Bank Color Single Straight
5 White
10 White
Loading Special Stock for Proper Finishing Output
Setting Up Complex Jobs
Single Reverse Double reverse
3R972310
3R97232
12-7