Table of Contents
Advertisement
Xerox Nuvera 200/288/314 EA Perfecting Production System
Special Features
The Xerox Nuvera 200/288/314 EA/MX Perfecting Production System is a high speed, duplex, black and
white Production printing system with the following unique features:
• Two EA/MX Production System print engines that print up to 200/288/314 IPM in duplex mode
• Pass Through Mode feature
• Tabs Optimization Mode feature
• Sheet Enhancement Module
• EA Toner (For MX MICR dry ink)
• Parallel RIP feature
• Image Quality Matching between the print engines
• Ability to connect to many third party finishing devices
Module Options
Basic Finishing Module - stacker/stapler with top tray.
Basic Finishing Module Plus - stacker/stapler with bypass paper path unit.
Basic Finishing Module Plus Top Tray with Direct Connect - stacker/stapler with bypass paper path
unit with a selectable Top Tray. Directly connects to 3rd party devices via standard DFA interface and
locking pins.
Sheet Retime Module - Required for 157 or 314 systems with a single BFM. The SRM is installed before
the BFM to process sheets at the same system speed going into the BFM.
5-2
Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Advertisement
Table of Contents
